Sunday, May 26, 2019

Altitude, Temperature and Humidity - Constantly in Flux

This is the sixth of a series of articles about the impact of air density on baseball performance.

So what about humidity? Well, as I have explained in detail on my website, humidity does not create heavy air for a ball to push through. Heavy air is caused by pressure on the air molecules being pulled down by gravity. As air molecules repel each other they keep the distance between them that is standard for the altitude and temperature conditions. Air molecules stack up on the earth just like anything else; however they also push upward and sideways against each other to maintain the distance allowable within that pressure. Wind is caused by the air molecules resisting each other and pulling each other back together to equalize the distance between them.

At sea level there is 5,000 feet more air stacked up than is stacked on Denver, Colorado, at 5,000 feet elevation. Additionally, when air gets cold and the molecules become sluggish, they can be pushed closer together. These two (sea level and cold air) are the main cause of greater air density. Engineers, scientists, physicists, pilots, meteorologists and many other disciplines understand the air density. Baseball people are just beginning to study this topic.

Humidity creates lighter air, not heavier air. It feels heavy against our skin and makes our bodies feel sticky, but there is more hydrogen in it than in dry air. There is more nitrogen in dry air, and nitrogen is heavier than hydrogen. So a baseball flying through the air is knocking molecules off it while the air molecules are pushing back against the ball.

Humidity is not a very significant amount of the density issue for baseball. Humidity accounts for only about 3% to 5% of the lift on a 4-seam fastball and is opposite what we feel on our bodies—dry air pushes the ball more and humid air pushes it less. There are still some studies that need to be done on humidity as it relates to baseball; but the facts I mentioned are basic.

After the championship fast-pitch game I revealed a few articles ago, I pitched at about 300 feet elevation. Although the air was humid and warm, I could hardly keep the fast-pitch rise-ball within the strike zone as I threw it toward the thigh to belt level of the hitter. At 5,000 feet in elevation, I could only make a pitch rise about 8 inches. At 300 feet elevation, at the same speed, I could make the pitch rise almost double the amount. In my case it didn’t matter; the hitters there were used to that amount of movement and my speed was not overwhelming.

In baseball a pitcher’s only significantly upward lifting pitch is the 4-seamer. It will lift about 3 inches more at sea level than at Denver, and it will tail off sideways about 5 inches more. No wonder coaches think they’ve really faced a quality pitcher when their team of hitters from a higher altitude plays at a lower elevation. The hitters from higher altitudes are simply not used to it.

Since this subject gets rather technical and baseball players have little time for such talk, I created a gauge of air density for use by athletes. I acquired the help of Colorado State University Professor Emeritus, Dr. Douglas Hittle, who provided me with an air density formula for my scale which accounts for all three factors constantly in flux, now called the “Neeley Scale.” The Neeley Scale gauges only the segment of the air density between the mountaintops and sea level on a 100 scale, rather than extending it all the way to the outer atmosphere.

For the purpose of comparing teams’ performances within various air densities, I created another index which uses a scale based on how familiar a team is with the air density they will play in their next game. This is called the Visual Memory Index (VMI).

By utilizing the VMI, we can compare player’s and teams’ performances within each of the ranges of air density with which they are more or less familiar. We show the sortable stats on the website. The advantage this provides for MLB and for fantasy players is to know in advance when, and against which pitches, players and teams will be most effective.

Most players and coaches assume the difference in ball movement due to air resistance is rather small. The reason they assume it is negligible; is they give all the credit for movement to the pitcher without understanding the air resistance from a scientific basis.

To give you an example of air pressure that sounds negligible, but is not-- consider that at sea level scientists measure the air at 14.7 psi and at Denver at 12.29 psi. The difference is 2.41 psi, but is not negligible at all. PSI—(pounds per square inch) identifies pressure on a very small area, smaller than the leading surface of the baseball. If one considers PSF (pounds per square foot), then 12” X 12” = 144 square inches X 2.41 psi equals 347 pounds per square foot. When calculated for a surface the size of a door in an airplane, the same differential of 2.41 psi = 7,287 pounds.

So, when a 6 oz. baseball with a leading surface of approximately 3 square inches pushes through about 54 feet of air at 90-95 mph through sea level pressure vs Denver pressure; it will be pushed by the air by approximately 2 inches upward and 3 inches tail-off. Then, when the air is colder at sea level vs warm air at the higher altitude location, another 1.7 psi in differential is created. This causes an additional almost 2 inches upward and 3 inches more tail-off.

This is where the VMI is helpful to know when and how much a player is adjusting. There are sortable stats on the www.baseballvmi.com website so that you may check to see how a player performed against each type of pitch and within each adjustment category. In my next article, I will show some of the stats for the entire league along with how to utilize this to make predictions.

Visual Memory by Clifton Neeley, creator of the Visual Memory Index© and author of the web-site www.baseballvmi.com. Clifton pitched and played baseball and fast-pitch softball in the mountainous southwest Colorado area from 4,000 feet in Grand Junction to 6,000 feet in Durango to 9,000 feet in Telluride prior to his college experience in baseball.

No comments:

Post a Comment